六合宝典

专注于工业润滑油销售
品牌润滑油授权经理商,正品保证
网站首页 | 关于我们 | 产品展示 | 产品总汇 | 润滑油知识 | 新闻资讯 | 联系我们
专注于工业润滑领域一站式采购 电话:0755-28027380 传真:0755-28027382 手机:13926530627 13537722320
工业润滑油专区

联系我们
深圳市鑫盈科贸易有限公司
地址:深圳宝安区龙华新区民治工业区
电话:0755-28027380
传真:0755-28027382
联系人:13926530627 蒋先生 13537722320 赵小姐
手机:13926530627 13537722320
网址:
邮箱:[email protected]

 

 
产品展示 >> FUCHS PLANTOGEAR S
FUCHS PLANTOGEAR S详细说明 (浏览807次)

FUCHS PLANTOGEAR S


Print

Environmentally Friendly Gear and Lubricating Oils Based on Synthetic Esters


Environmentally Friendly Gear and Lubricating Oils Based on Synthetic Esters

It has been recognized for a number of years now that the use of mineral oil-based lubricants poses certain environmental risks. Leakages, emissions and spillages when handling gear and lubricating oils lead to direct pollution of the surroundings and thus the environment. This fact led FUCHS to develop rapidly biodegradable lubricants based on vegetable oils and synthetic esters.

The PLANTOGEAR S series of oils are based on synthetic esters. They represent an environmentally friendly alternative to mineral oil-based gear and lubricating oils. They can be classified as CKC gear oils according to ISO 6743-6 and meet ISO/CD 6743-4 guidelines for HEES fluids. 

The advantages of PLANTOGEAR S are: 


  • Rapidly biodegradable (greater 90 % within 14 days according to CEC-L-33-A-93) 
  • German Water Hazard Class WGK 0, i.e. generally not hazardous for water 
  • Non-toxic, physiologically harmless 
  • Free of heavy metals 
  • Good low-temperature characteristics 
  • Excellent resistance to ageing and oxidation 
  • Excellent viscosity-temperature behaviour because of their high natural VI 
  • Excellent anti-wear properties 
  • Extremely shear-stable 
  • Rapid air release 
  • Minimal foaming 
  • Insoluble in water 
  • Good demulsibility characteristics 
  • Applicable at tank temperatures ranging from -35 °C to +90 °C
Application: 

PLANTOGEAR S lubricants can be used in spur gears, bevel gears, planetary gears and worm gears at working temperatures up to 90 °C. PLANTOGEAR S oils are recommended for gearboxes and circulation systems in packaging and food stuff related industries as well as for gearboxes operated in Protected Water Zones and in water purification plants. 

For first-fill and change-over procedures we recommend to flush the gearbox or lubrication system. As stated in ISO/CD ECO, residual quantities of mineral oil should be kept to a minimum by flushing prior to refilling. Compatible internal finishes on tanks and gearboxes should be selected. Paint finishes which are not 2-part epoxy systems can display poor resistance to mineral oil as well as synthetic esters. In general, we recommend the use of stainless steel tanks. Filter systems should also be compatible with synthetic esters.

The powerful cleaning effect of these fluids can dislodge large amounts of dirt and contaminants and this can, in turn, shorten the life of filters. System filters should be cleaned or changed after about the first week of use with PLANTOGEAR S. The ISO/CD ECO guidelines should also be observed. To maintain optimum reliability, any water which has collected in systems which have been shut-down for longer periods should be drained. Water or moisture problems can be reduced if filtering and drying equipment is fitted to tank breathers. According to ISO/CD ECO, water content during use should be kept below 0.1 %.

The use of synthetic ester resistant sealing materials and plastics is recommended. 

Our application engineers will be glad to advise you on: 

  • Experiences with these products 
  • Application possibilities 
  • Material compatibility 
  • Change-over procedures
and service facilities regarding PLANTO products. 


Typical data: 

PLANTOGEAR   100 S 150 S 220 S 320 S 460 S 680 S 1000 S  
Lubricating oil type acc. to ISO 6743-6 acc. to DIN 51 502   CKC 100 CLPE 100 CKC 150 CLPE 150 CKC 220 CLPE 220 CKC 320 CLPE 320 CKC 460 CLPE 460 CKC 680 CLPE 680 CKC 1000 CLPE 1000  
Characteristics Unit               Test method
Colour   1 1 1 1 1 1 1 ASTM D 1500
Kinematic viscosity                  
at 40 °C mm/s 101 148 220 325 467 686 1057 ASTM D 445
at 100 °C mm/s 17.8 23.4 33 47 60.6 82 113 ASTM D 445
Viscosity index   194 189 196 204 211 205 208 ASTM D 2270
Density at 15 °C kg/l 0.925 0.926 0.927 0.929 0.931 0.933 0.935 ASTM D 1298
Flash point, Cleveland open cup °C 290 252 290 290 290 290 >300 ASTM D 92
Pour point °C - 36 – 39 – 36 – 30 – 33 – 30 -27 ASTM D 97
Neutralization number mg KOH/g 1.7 1.7 1.6 1.5 1.4 1.4 1.4 ASTM D 974
Foaming                  
seq. I ml 5/0 5/0 10/0 20/0 20/0 20/0 60/0 ASTM D 892 seq. I-II
seq. II ml 25/0 20/0 10/0 40/0 25/0 30/0 35/0 ASTM D 892 seq. I-II
Copper corrosion degree of corr. 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 1a-100A3 ASTM D 130
Rust prevention   pass A pass A pass A pass A pass A pass A pass A ASTM D 665
FZG mechanical gear rig test load stage > 12 > 12 > 12 > 12 > 12 > 12 > 12 DIN 51 354-2


 Disclaimer of Liability
深圳市和有限公司 : -   手机:13670209168

上一产品: Mobil SHC Gear 680 OH,Mobil SHC Gear 680OH,Mobil SHC Gear680OH
下一产品: 美孚齿轮油(MOBIL)-美孚齿轮油产品线
幸运快乐8www.gudegyogya.com版权所有 (C) 2009 深圳市鑫盈科贸易有限公司官方网站  All Right Reserved
地址:深圳宝安区龙华新区民治工业区 电话:0755-28027380 传真:0755-28027382 邮编:[email protected] 粤ICP备16090050号
工业润滑油|壳牌润滑油|美孚润滑油|福斯润滑油|加德士润滑油|嘉实多润滑油
友情链接:幸运快乐8开奖直播  幸运快乐8  幸运快乐8  幸运快乐8  幸运快乐8  幸运快乐8平台  幸运快乐8官网